Wednesday, 13 May 2015

Five Swimming-Pool Maintenance Tips That You Must Follow

Keeping your swimming pool sparkling clean does not have to be as troublesome as you might think. All swimming-pools are diverse, and so are their maintenance requirements. However, they all share one theme: the key to unspoiled swimming-pool health is regular maintenance. Although you left the job to a professional pool cleaning company, but still you need to do a few things to make sure your pool remains in great condition for years to come.

Skim debris and clean out baskets:

filters imagesSkimming the surface of your pool by hand in regular interval is the best thing you can do to keep your pool fresh and clean. Floating leaves and debris will eventually sink, becoming tougher to remove? Use a hand skimmer to take away bugs, leaves, and other undesired stuff. Skimming considerably improves the effectiveness of the swimming-pool’s circulation system and lessens the quantity of chlorine you will require to put into your pool.

Vacuum the swimming and brush tile and walls:

A pool must be vacuumed every week to keep water crystal clear and decrease the quantity of chemicals you require to put into it.

However, vacuuming is not the lone task that must be accomplished once a week. Brushing the walls and tile helps curtail algae buildup and calcium deposits so they don’t aggravate and become bigger issues.

Clean the swimming -pool filter:

There’re 3 types of swimming-pool filters: sand, cartridges and diatomaceous earth. While there are diverse maintenance procedures for each kind, all need periodic cleaning. Cleaning the filter reduces the chlorine consumption and keeps the pump running smoothly. However, regular cleaning of pool filter is not recommended as it can reduce the filter ability to filter fine particles. Instead, clean the filter when the pressure rise 3-5 pounds over the clean pressure.

Check and sustain the water level:

imagesA large amount of water will be lost during the swimming season due to evaporation, splashing and back washing. When the pool water level is set to the middle of the Swimming pool skimmer baskets and the skimmer door is functioning properly. Debris will be skimmed off the surface reducing the need to skim the pool and vacuuming the pool. Be sure to empty the skimmer basket, not doing so can damage the pool pump by restricting water flow to the pump.

Maintain the pH level:

Swimming-pool water must be tested on a regular basis to ensure it is properly balanced and sanitized. The pH is particularly important as it affects the efficiency of the chlorine. A reading between 7.4 and 7.6 is perfect, and 7.2 to 7.8 is acceptable in most cases. A Higher pH will reduce the chlorine ability to combat algae, bacteria and germs. Lower pH will cause the chlorine to be too active.

Follow My Pool Inc on:-
facebook twitter Googleplus

No comments:

Post a Comment