Five Swimming-Pool Maintenance Tips That You Must Follow

Keeping your swimming pool sparkling clean does not have to be as troublesome as you might think. All swimming-pools are diverse, and so are their maintenance requirements. However, they all share one theme: the key to unspoiled swimming-pool health is regular maintenance. Although you left the job to a professional pool cleaning company, but still you need to do a few things to make sure your pool remains in great condition for years to come.

Skim debris and clean out baskets:

Skimming the surface of your pool by hand in regular interval is the best thing you can do to keep your pool fresh and clean. Floating leaves and debris will eventually sink, becoming tougher to remove? Use a hand skimmer to take away bugs, leaves, and other undesired stuff. Skimming considerably improves the effectiveness of the swimming-pool’s circulation system and lessens the quantity of chlorine you will require to put into your pool.

Vacuum the swimming and brush tile and walls:

A pool must be vacuumed every week to keep water crystal clear and decrease the quantity of chemicals you require to put into it.

However, vacuuming is not the lone task that must be accomplished once a week. Brushing the walls and tile helps curtail algae buildup and calcium deposits so they don’t aggravate and become bigger issues.

Clean the swimming -pool filter:

There’re 3 types of swimming-pool filters: sand, cartridges and diatomaceous earth. While there are diverse maintenance procedures for each kind, all need periodic cleaning. Cleaning the filter reduces the chlorine consumption and keeps the pump running smoothly. However, regular cleaning of pool filter is not recommended as it can reduce the filter ability to filter fine particles. Instead, clean the filter when the pressure rise 3-5 pounds over the clean pressure.

Check and sustain the water level:

A large amount of water will be lost during the swimming season due to evaporation, splashing and back washing. When the pool water level is set to the middle of the Swimming pool skimmer baskets and the skimmer door is functioning properly. Debris will be skimmed off the surface reducing the need to skim the pool and vacuuming the pool. Be sure to empty the skimmer basket, not doing so can damage the pool pump by restricting water flow to the pump.

Maintain the pH level:

Swimming-pool water must be tested on a regular basis to ensure it is properly balanced and sanitized. The pH is particularly important as it affects the efficiency of the chlorine. A reading between 7.4 and 7.6 is perfect, and 7.2 to 7.8 is acceptable in most cases. A Higher pH will reduce the chlorine ability to combat algae, bacteria and germs. Lower pH will cause the chlorine to be too active.

Follow My Pool Inc on:-

Different Type of Swimming Pool Covers

There are 2 main uses of pool cover. First, a pool cover can decrease your swimming-pool’s maintenance expenditure, and second; a safety cover saves you or your children from serious mishap. There are a range of covers accessible, and you must discover one that meets your requirements. There are four main kinds of available pool covers. They are safety covers, winter covers, solar covers, and leaf nets respectively. Let’s have a look at them briefly:

Solar pool covers:

This type of cover will help save water and energy. They can raise the water temperature of your pool by an average of 10 degrees by soaking sunlight throughout the day and keeping that temperature in the swimming-pool at night. A solar pool cover will decrease your water and chemical evaporation by up to seventy percent, which can save a large amount of water every month.

Winter pool covers:

These kinds of pool covers are employed mainly to safeguard the swimming-pool from winter weather and to keep dirt, leaves and other debris from getting into the swimming pool. For an in-ground swimming pool, a winter pool cover is retained in place with water bags positioned around the border. Leaves are collected on the top of the cover. A winter pool cover also obstructs sunlight and prohibits algae build up. Most importantly, a winter pool cover is a crucial part of winterizing your swimming-pool, which makes your springtime activities much simpler and less costly.

Leaf net covers:

 

These types of covers are very light in weight and help you reduce buildups of soaked leaves and twigs entering the pool as they are retained above your leaf net cover. This type of cover makes removal of leaves and other debris simpler than vacuuming the pool. .They can be put over solar or winter covers, extending the life of your solar or winter cover. They can be utilized in any season and are a huge aid if your swimming-pool is placed in a region enclosed by trees.

Safety pool covers:

Safety covers are the most expensive kind of pool cover. A safety pool cover is a safety fence over your swimming-pool. A safety pool cover is secured into the deck. There should be no gaps between the cover and the pool that could enable a child or pet to get under the cover and into the water. These types of cover offer the pool owner peace of mind that no kid falls into the swimming pool.

Mypool.com is a leading supplier of pool products offering amazing deals on all pool products. Also, find great deals on Swimming pool skimmer baskets, spa air blowers, swimming pool filters at Mypool.com

Follow My Pool Inc on:-

Facts to Consider Before Choosing a Filter for Your Swimming Pool

A swimming pool filter is used to remove debris from the pool. For this, you need a pool filter that is good in quality. In the far distant past it was not uncommon to drain the pool when the water quality deteriorated and refill it with fresh water. All pools today must have a properly sized and installed filter. The size of the filter is determined by determining the size of the pool in gallons and dividing it by Four Hundred and Eighty. The resulting number is the gallons of water that the filter must be capable of handling per minute (eight hours x 60 minutes per hour). For example: 80 GPM. The swimming pool pump must be capable of pumping this number of gallons. There are other factors that should be considered, but this discussion we will ignore them. The pump and filter are sized to the gallons of the pool, the pressure of the filter should be within the normal specifications for the filter. A larger filter will lower the operating pressure and increase the time in-between cleaning the filter.

There are three types of swimming pool filters, they are D.E, sand system and cartridge filters. Each has its own characteristics, cost, ease of use, and water quality.

Cartridge filters are made of paper like material, supported on a frame. When water comes into the filter, the debris is captured on the substrate and the clean water is passed back to the pool. The cartridge portion of the filter must be replaced periodically, typical every two to four years. While cartridge filters can be used on any size pool, larger pools require larger filters. Replacing these larger filter elements can be costly. Therefore, cartridge filters are best suited for small to medium sized pools.

While sand filters are less efficient than cartridges. There ease of use not having to buy replacement cartridges is a great economic advantage. Sand filters, water enters the top of the filter, flows downward through the sand and back to the pool. Sand filters are best for medium and large pools. If water quality is maintained properly the sand could easily last 5-10 or more years.

D.E. stands for diatomaceous earth, which’s the petrified remains of diatoms, a kind of hard-shelled algae. It’s rough and cruse texture makes it a great, organic filtration medium. D.E. filters produce the finest water quality. The D.E. powder is coated on to a nylon cloth material, the water is passed thru the D.E. thru the substrate and back to the pool. D.E filters are the most costly to buy and medium in cost for on-going expenses. They are best suited for medium to large pools.

At MyPool.com we have Hayward pool filters and Hayward pool filter parts. My Pool is a leading supplier of Hayward pool products and accessories that are ideal as far as price and quality are concerned. So, feel free to contact us now! 954-442-1066 (EST).

Follow My Pool Inc on:-

What to Consider Before Buying Pool Filters

Swimming pool filters filter out dirt and debris from the water. Without a filter, the quality of the swimming pool water will deteriorate rapidly. When installing a pool filter, size does matter. The pump and filter must be properly sized to the volume of the swimming pool. There are three main types of pool filters for swimming pools. They are cartridge, D.E. (Diatomaceous Earth) and sand. However, there are several crucial factors that need to be taken into account before deciding which filter is appropriate for your swimming pool.

How the swimming-pool filters work?

First, let’s discuss cartridge filters. The cartridge is made from special paper like material and is sized by increasing the height and or the number of pleats. When the water goes through the filter, the paper traps the dirt while the water passes through, Water is sent back into the swimming pool, nice and clean. Cartridges need replacement, typically ever 2-5 years. Cartridge filters are used on spas to large pools. Larger pools require larger cartridge surface areas to accommodate increased volume of the pump. Cartridge filters produce more polished water as compared to sand, but not quite as great as D.E.'s.

Sand filters, the water generally flows from top to bottom through the sand. The sand in the filter is a special silica sand prepared especially for swimming pool filters. The sand first traps larger particles and as the filter gets dirtier it traps smaller particles. Sand filters are used on small to extremely large pools. They are easy to maintain and very reasonable to purchase. Sand filters are my personal favorite.

DE, stands for diatomaceous earth. DE is a powder of solidified remains of diatoms, a kind of hard-shelled algae. Its rough and coarse texture makes it a great, natural filtration gadget. The DE powder is coated onto grids, the water passes through the DE and through the grid to filter the water. Periodically, when the pressure increases, the DE needs to be replaced. Diatomaceous Earth filters are the most efficient of the three and can filter debris and dirt out to 3-5 microns. DE filters are generally the most expensive to purchase. Pool filter grids within the filter typically last 5-10 years. D.E. Filters are ideal for medium to large in-ground swimming-pools.

Once you have determined the size of the filter, choosing the type of filter is more or less a personal preference.

MyPool, is a leading supplier of pool supplies offering Hayward Pool Filters to make your pool as clean as it could be. MyPool has Hayward swimming pool filter parts that are not just great in quality but very affordable as well. In fact, at MyPool, you can find everything you require to keep your swimming pool sparkling and clean all summer long.

Follow My Pool Inc on:-